Microsoft Defender is already running on every Windows 11 PC, and most of its defaults are sensible. A few of the strongest protections are switched off out of the box, though: ransomware protection, some of the phishing warnings and, on older or upgraded PCs, Memory integrity. Below is my recommended configuration for the Windows Security app in 2026, screen by screen, in the order the app shows them. It matches Windows 11 version 25H2 (build 26200.9711, the October 2026 security update) with Defender Antivirus platform 4.18.26100.4.
Microsoft Defender is made by Microsoft and is free with Windows 10 and 11. In the latest AV-TEST round (July to August 2026) it scored 17.5 out of 18 on Windows 11 and got the “Top Product” award, losing half a point on performance. In AV-Comparatives’ Real-World Protection Test for February to May 2026 it blocked 396 of 400 attacks (99.0%) and earned the top ADVANCED+ award. It has had problems too. In May 2026 CISA listed two Defender bugs as exploited in the wild, one of which could switch Defender off. Both were fixed through Defender’s normal automatic updates.
If you want to compare Defender with Bitdefender, Norton and the rest, see my best antivirus guide. This article sticks to the settings inside Windows Security.
If a setting doesn’t match what you’re seeing, you are probably on a different version than this guide. Leave a comment and I’ll do my best to help.
ON: enable it.
OFF: disable it.
DEPENDS: the right call depends on your setup.
TEST: worth confirming on your own machine before you trust it long term.
My recommended setup:
- Real-time, cloud-delivered protection and Tamper Protection ON
- Controlled folder access ON, with the few apps it blocks added by hand
- Potentially unwanted app blocking ON, both “Block apps” and “Block downloads”
- Smart App Control ON if you mostly use well-known apps
- Memory integrity and Local Security Authority protection ON
- Firewall ON for all three network profiles
Security at a Glance (Home Screen)
Open Windows Security from the Start menu or the shield icon in the system tray. The home screen only shows status. Each tile has a green tick, a yellow warning (usually a recommendation, such as setting up Windows Hello) or a red cross, which means something important is off. The menu on the left lists the same areas I cover below, in the same order.
If you install another antivirus, Defender Antivirus turns itself off and most of the Virus & threat protection settings disappear. The rest of the app (firewall, App & browser control, Device security) keeps working.
Virus & Threat Protection
This page shows your last scan, any current threats and the Quick scan button. The settings are under Manage settings.
1. Scan Options
- Quick scan: checks the places malware usually hides. Defender already runs one by itself when needed, at the latest after a week, so you rarely need to click it.
- Full scan: “scans every file and program on your device.” It can take hours. I’d run it after you clean up an infection or once after setting up a new PC.
- Custom scan: scans only the folder or drive you pick, such as a USB stick.
- Microsoft Defender Antivirus (offline scan): restarts your PC and scans before Windows loads, from the Windows Recovery Environment. Malware that hides deep inside Windows has a harder time hiding from it. Save your work first, because the PC restarts straight away, and check Protection history for the results. Use it if you think your PC is infected and a normal scan finds nothing.
2. Virus & Threat Protection Settings
Real-time protection: ON – This scans files as you open, download or run them. It is the core of Defender. If you switch it off, Windows turns it back on by itself after a short while.
Dev Drive protection: ON – This only matters if you have created a Dev Drive, a special fast drive for programming work. On a Dev Drive, Defender scans files just after they open instead of before, which speeds up coding work. Microsoft says this gives less protection than a normal scan but much better protection than an exclusion. Without a Dev Drive this switch does nothing. See volumes shows which drives it covers.
Cloud-delivered protection: ON – Defender checks unknown files against Microsoft’s online service. It is on by default, and Microsoft says “we recommend keeping cloud protection turned on.” Defender leans on the cloud more than most antivirus apps. In AV-Comparatives’ March 2026 test, Defender detected 98.1% of samples online but only 89.2% offline. AV-Comparatives says Defender “relies heavily on cloud-assisted intelligence”, so switching this off costs you a lot of protection.
Automatic sample submission: DEPENDS (on by default ) – When Defender meets a suspicious file it doesn’t know, it can upload the file to Microsoft for analysis. That helps detection, but a suspicious document of yours could end up on Microsoft’s servers. Members of the Privacy Guides forum recommend turning it off because it “might leak your data”. My view: leave it on for a normal home PC. Turn it off if you handle confidential client files. Cloud-delivered protection still works without it. Submit a sample manually lets you send a single file yourself.
Tamper Protection: ON – This stops malware and other programs from quietly switching Defender off. With it on, real-time protection, cloud protection, updates and automatic actions all stay locked on, and attempts to change them through the registry are blocked. Microsoft notes that attackers often try to disable security features first, so this is one of the most important switches on the page. You can still change settings yourself in the app as an administrator.
Controlled folder access: covered under Ransomware protection below.
Exclusions: keep empty – An exclusion tells Defender to skip a file, folder, file type or process (a running program). Each one is a gap malware can use, so only add one when Defender keeps blocking a program you trust and you have confirmed it is safe. If you must exclude a file type for speed, PCWorld advises never to exclude programs, macro-enabled Office files, PDFs, archives, scripts or installers. Developers should use a Dev Drive instead of folder exclusions.
Notifications – This link takes you to the notification settings (see the Settings section at the end).
3. Virus & Threat Protection Updates
Security intelligence: automatic – Defender’s virus definitions update through Windows Update. Check for updates forces an update now. Don’t block Windows Update. The May 2026 fixes for the exploited Defender bugs arrived through these automatic engine updates.
4. Ransomware Protection
Controlled folder access: ON – Ransomware is malware that encrypts (scrambles) your files and asks for money to unlock them. Controlled folder access lets only trusted apps change files in protected folders. It is off by default, and I think it is the most useful setting you can add to Defender.
- Protected folders: by default it covers Documents, Pictures, Videos, Music and Favorites (yours and the Public ones), plus the disk’s boot sectors. You can’t remove these, but you can add more, for example a photo archive on a second drive. If OneDrive backs up your Documents folder, the protection follows the folder into OneDrive.
- Allow an app through Controlled folder access: Defender trusts most well-known apps by itself. Some apps still get blocked, often games that save to Documents (How-To Geek mentions this) or smaller photo and office tools. When that happens you get a pop-up, and an entry appears in Protection history. Add the app here only if you trust it. Script tools like PowerShell are never trusted automatically.
TEST: expect some “unauthorized changes blocked” pop-ups at first while you add the apps you use. One Hacker News commenter called it “somewhat annoying at first”, and another called it a good idea with an annoying implementation. If an app still cannot save after you allow it, restart the app, because the allow rule only works when the app starts.
Ransomware data recovery: ON if you use OneDrive – This links to OneDrive, which keeps file versions you can restore after an attack. Defender has no ransomware rollback of its own like Bitdefender’s Ransomware Remediation, so a backup is your real safety net.
Account Protection
This page mostly links to sign-in settings. It has three parts:
- Microsoft account: shows whether you sign in with a Microsoft account. Turn on two-step verification for it in your Microsoft account online.
- Windows Hello: ON – sign in with your face, fingerprint or a PIN instead of a password. Windows 11 can also store passkeys (password-free logins for websites) protected by Windows Hello. You manage them under Settings > Accounts > Passkeys.
- Dynamic lock: DEPENDS – locks your PC when your paired phone moves out of Bluetooth range, within about a minute. Handy in an office, but still press Windows + L when you walk away.
Firewall & Network Protection
A firewall decides which network connections are allowed in and out of your PC. Windows has three profiles, and the one marked “(active)” is the one in use:
| Profile | When Windows uses it | My setting |
|---|---|---|
| Domain network | Work PCs joined to a company network | ON (your IT team manages it) |
| Private network | Your home network, which you trust | ON |
| Public network | Cafés, hotels, airports. Other devices belong to strangers | ON |
Microsoft Defender Firewall: ON for all three – All three are on by default (AllAboutCookies). Microsoft warns that turning it off “could make your device more vulnerable to unauthorized access,” and recommends keeping it on even if you run another firewall.
Incoming connections, “Blocks all incoming connections, including those in the list of allowed apps”: DEPENDS – Off by default. Tick it on the Public profile if you work from cafés or hotels and don’t need file sharing or casting there. Microsoft notes it “might cause some apps to stop working”, so leave it unticked on your Private profile.
Make sure your home Wi-Fi is set to Private and everything else to Public. You change this in Settings > Network & internet, under your Wi-Fi network’s properties.
- Allow an app through firewall: shows which apps can accept incoming connections. Review it once in a while and remove apps you no longer use. Every exception lets traffic past the firewall.
- Network and Internet troubleshooter: for connection problems, not security.
- Firewall notification settings: ON – you get told when the firewall blocks a new app.
- Advanced settings: opens the classic firewall rules editor. Leave it alone unless you know exactly what you are doing. Microsoft warns that wrong rules “can cause your system to be more vulnerable.”
- Restore firewalls to default: your reset button if something you changed broke your network.
App & Browser Control
1. Smart App Control
Smart App Control: ON (DEPENDS on how you use your PC) – Smart App Control checks every app before it runs. It asks Microsoft’s cloud service whether the app is safe. If the service isn’t sure, it checks for a valid digital signature, and it blocks apps that are unsigned and unknown. It has three modes:
- Evaluation: Windows watches how you use the PC, blocks nothing, then turns Smart App Control on or off by itself.
- On: blocks untrusted apps.
- Off: no checks.
In 2026 Off stopped being permanent. Before, the only way back from Off was to reinstall Windows. Since the April 2026 update (KB5083769) you can switch it back on in Windows Security. A bug that greyed out the option was fixed in the 28 October 2026 preview update.
My advice: turn it On if you mostly use well-known apps from big publishers and the Microsoft Store. Keep it Off if you often install small open-source tools, older software or custom installers. There is “no way to bypass Smart App Control protection for individual apps”, so when it blocks something you need, your only choice is to switch it all off. Smart App Control is not available if you turned off optional diagnostic data during setup or if your PC runs in S mode. It works alongside Defender and any other antivirus.
2. Reputation-Based Protection
Check apps and files: ON – checks the reputation of apps and files you download from the web, and warns you before you run one that is unknown or known to be bad.
SmartScreen for Microsoft Edge: ON – warns about phishing sites (fake login pages), tech support scams and dangerous downloads in Edge. This switch only covers Edge. AV-Comparatives notes that SmartScreen works best in Edge and Outlook. AllAboutCookies’ own test in October 2026 found Defender failed to catch a phishing page, so don’t treat this as your only defence against phishing.
Phishing protection: ON – This protects the password you use to sign in to Windows. It only works if you sign in with a password, not a PIN or Windows Hello. It has three options:
- Warn me about malicious apps and sites: ON – warns you if you type your Windows password into a fake site. On by default.
- Warn me about password reuse: ON – warns you if you type your Windows password into another site or app. Off by default.
- Warn me about unsafe password storage: ON – warns you if you type your Windows password into Notepad or an Office file. Off by default.
(https://www.bleepingcomputer.com/news/microsoft/windows-11-gets-phishing-protection-boost-and-sha-3-support/). Confirm on a 25H2 install.]
If you sign in with Windows Hello only, these warnings do nothing, which is fine.
Potentially unwanted app blocking: ON, both boxes ticked – Potentially unwanted apps (PUAs) are adware, browser hijackers, fake “PC cleaners” and junk bundled with free installers.
- Block apps: catches PUAs already downloaded or installed, from any browser.
- Block downloads: catches them while downloading, but only in Edge.
(https://www.makeuseof.com/microsoft-defender-has-stronger-protections-you-probably-arent-using/) quotes Microsoft as saying it has been on since August 2021, but found it off on its own test PC in September 2026.] Now and then it flags a legitimate small tool, which you can review and allow in Protection history.
SmartScreen for Microsoft Store apps: ON – an extra check on web content used by Store apps.
3. Exploit Protection
Exploit protection: leave at “Use default” – An exploit is an attack that abuses a bug in a normal program to run malware. Exploit protection adds memory defences to every program, and it is already running. Under System settings you will see:
- Control flow guard (CFG)
- Data Execution Prevention (DEP)
- Force randomization for images (Mandatory ASLR)
- Randomize memory allocations (Bottom-up ASLR) and High-entropy ASLR
- Validate exception chains (SEHOP)
- Validate heap integrity
Each one says “Use default (On)” or “Use default (Off)”. Microsoft says the defaults are its recommendation for everyday home use, and it warns that some of these defences break some programs. Program settings lets advanced users add stricter rules for one app. A wrong setting there can stop the app from starting.
Device Security
This page covers protection built into your hardware. At the bottom, Windows tells you whether your PC meets “standard” or “enhanced” hardware security. “Enhanced” means Memory integrity is on as well.
1. Core Isolation
Memory integrity: ON – Memory integrity runs the part of Windows that checks drivers inside a protected, virtualized area. A driver is low-level software that talks to your hardware. Because drivers run deep inside Windows, attackers abuse them to hijack the PC, and Memory integrity makes that much harder. It is on by default for most new Windows 11 PCs, and since October 2026, Windows updates have been switching it on for more eligible PCs. If you switched it off before, Windows keeps your choice.
If it won’t turn on, Windows will name an “incompatible driver”. Check with the device maker for an updated driver, or remove it, then try again. Your PC also needs virtualization switched on in the BIOS (the firmware settings screen). MakeUseOf’s advice is to back up first and change only that one BIOS setting. TEST: on older processors it can cost some performance, so check your games and heavy apps afterwards.
Local Security Authority protection: ON – The Local Security Authority (LSA) is the part of Windows that handles your sign-in secrets. This setting blocks untrusted software from reading its memory, a common way attackers steal passwords. Microsoft says it is on by default, and upgraded PCs get it after a five-day check. If yours shows off, turn it on and restart. If it blocks a program, Windows will tell you the file name.
Microsoft Vulnerable Driver Blocklist: ON – A list of drivers with known security holes that attackers can use to take over Windows. It has been on by default since Windows 11 22H2 and updates through Windows Update. If Memory integrity or Smart App Control is on, the blocklist is forced on too. Microsoft admits it can occasionally make a device misbehave, and if that happens I’d update the blocked driver rather than switching the list off.
Kernel-mode Hardware-enforced Stack Protection: ON if available – Extra protection against a type of memory attack. It only shows up on newer Intel and AMD processors and needs Memory integrity on. Microsoft says some legitimate drivers clash with it, and Windows will name the incompatible driver if it can’t turn on. Check for a driver update before you give up on it.
Memory access protection and Firmware protection are status items, not switches. Memory access protection stops malicious devices plugged into Thunderbolt or similar ports from reading your memory.
2. Security Processor
Security processor (TPM): view only – The TPM is a security chip that stores encryption keys, for example for BitLocker and Windows Hello. Here you can see its version and status. Security processor troubleshooting has a Clear TPM button. Don’t press it unless support tells you to. Microsoft warns you to “back up your data before you clear the TPM”, because cleared keys can lock you out of encrypted data. Make sure you know where your BitLocker recovery key is.
3. Secure Boot
Secure boot: ON – Secure boot stops rootkits (malware that loads before Windows) at start-up. There is no switch here. You can only change it in the BIOS, and you might need to turn it off for some graphics cards or for Linux and older Windows versions. Microsoft’s original Secure Boot certificates started to expire in June 2026, and the new ones arrive through Windows Update, so don’t pause updates.
Device Performance & Health
A health report with nothing to configure. It flags low storage capacity, battery problems, and apps or software that need attention. Glance at it when your PC feels slow.
Family Options
Family options: DEPENDS – A shortcut to Microsoft Family Safety, which runs online and needs a Microsoft account. From there you can set screen time limits for a child’s account and see their signed-in devices. Nothing is set up from inside Windows Security itself. If you have kids, give them their own standard (non-admin) Windows account, and set up Family Safety on it.
Protection History
Protection history: check it monthly – It lists every threat Defender found, every PUA it removed, every app Controlled folder access blocked, and any key service that was switched off. On a clean PC it simply says “no recent actions.” This is where you go when an app suddenly can’t save files or a download disappears. You can restore items Defender got wrong, but only if you are sure they are safe.
Settings
The gear icon at the bottom left opens the app’s own settings.
- Notifications, informational notifications: ON – tells you about scan results and recent activity.
- Files or activities are blocked: ON – you want to know when Controlled folder access or Smart App Control blocks something. Otherwise you’ll wonder why an app “doesn’t work”.
- Account protection notifications: ON – warns you about problems with Windows Hello or Dynamic lock.
- Firewall notifications: ON for all profiles.
- Security providers: shows which antivirus and firewall Windows is using.
The Separate Microsoft Defender App
There is also an app simply called Microsoft Defender, which is easy to confuse with Windows Security. It comes with Microsoft 365 Personal ($99.99 a year), Family ($129.99) or Premium ($199.99). On Windows the antivirus still comes from Windows Security. The app adds a dashboard for all your devices, antivirus on Mac and Android, and identity theft and credit monitoring. The monitoring only works in the US. Its built-in VPN was discontinued in February 2025. If you live outside the US and only use Windows, you don’t need it.
Who Is Microsoft Defender For?
Defender is a solid baseline for most home users who already practise basic security hygiene: they keep Windows updated, use a password manager and two-factor authentication, and don’t install cracked software. It’s free, already installed and scores near the top in independent tests. With Controlled folder access, PUA blocking and the Core isolation features turned on, it covers a lot more than its defaults suggest.
It is not my pick for everyone. Defender depends heavily on the cloud, so PCs that are often offline get weaker protection. Its phishing protection is strongest in Edge, it has no ransomware rollback beyond Controlled folder access, and AV-Comparatives points to gaps in areas like banking protection and identity monitoring compared with paid suites. If you want those extras, or you run a family PC where someone will click on anything, a paid suite like Bitdefender adds more layers. For the full comparison, see my best antivirus guide and my Bitdefender review. To protect your connection on public Wi-Fi as well, see my Proton VPN, Mullvad and NordVPN settings guides.
Did I Miss Anything?
I am always looking to improve my tutorials and will listen to any suggestions you have in the comments.
Cheers,
Mefat



Comments 0
No comments yet. Questions, corrections and your own experience are all welcome.