Bitwarden is safe enough straight after sign-up, but a few of its defaults are not what I would pick. Two-step login is off until you set it up. Many accounts still use the older PBKDF2 setting to protect the master password. In the browser extension, the vault stays unlocked until you restart the browser. Below is my recommended configuration for Bitwarden in 2026, screen by screen, for the web app (2026.10.1), the browser extension (2026.10.2) and the desktop app (2026.10.3).
Bitwarden is made by Bitwarden, Inc., a US company based in Santa Barbara, California. You can keep your vault on its US or EU servers, or run your own server. The apps are open source (GPLv3). In 2025 Bitwarden had its code checked by Cure53, Unit 42, Fracture Labs and the Applied Cryptography Group at ETH Zurich (audit list). The ETH Zurich researchers tested what a hacked Bitwarden server could do and found 12 possible attacks. Bitwarden says seven are fixed or being fixed, and it accepts the other three as design decisions.
If you want to compare Bitwarden with 1Password and the rest, see my best password managers guide. This article sticks to the settings inside the apps.
If a setting doesn’t match what you’re seeing, you are probably on a different version than this guide. Leave a comment and I’ll do my best to help.
ON: enable it.
OFF: disable it.
DEPENDS: the right call depends on your setup.
TEST: worth confirming on your own devices before you trust it long term.
My recommended setup:
- Argon2id for the master password key, with Bitwarden’s default values
- Two-step login with a security key or authenticator app, recovery code printed
- New device login protection ON
- Browser extension timeout of 15 minutes, action Lock, unlocked with biometrics or a long PIN
- Autofill on page load OFF, keyboard shortcut instead
- Default URI match detection: Base domain
- Emergency access for one trusted person (Premium)
- A password-protected encrypted export a few times a year
Web App: Settings – My Account
Most account security settings only exist in the web app at vault.bitwarden.com (or vault.bitwarden.eu for EU accounts). Log in and open Settings, then My account.
Change email – Your email is your login name and where Bitwarden sends security codes, so use an address you will keep for years.
Fingerprint phrase – Five random words linked to your account’s encryption key. You don’t need to remember them. Bitwarden says not knowing it “will never result in you being locked out of your vault.” It only matters when Bitwarden asks you to compare it with someone, for example when a family member joins your organization. Then compare it over a phone call, not by email alone.
The Danger zone at the bottom holds four buttons:
New device login protection: ON – Since 4 March 2025, accounts without two-step login get a code by email when they log in on a new device. The button here turns that off. Don’t press it. Bitwarden’s own warning says that without it, “anyone with your master password can access your account from any device.” Once you set up two-step login, this email check no longer applies to you.
Deauthorize sessions: use when needed – Logs your account out everywhere, including the device you are on. Use it after logging in on a public computer or losing a device. Other devices “may continue to remain active for up to one hour.” It is all or nothing, and forum users note that landing back on the login screen afterwards is normal.
Purge vault and Delete account: leave alone – Purge deletes every item in your personal vault (shared organization items stay). Delete removes your account. Neither can be undone.
Web App: Settings – Security
This page has five tabs: Session timeout, Master password, Two-step login, Devices and Keys.
Session timeout (web app)
Timeout: 15 minutes (default) – Fine as it is. Other choices are “On browser refresh” or Custom.
Timeout action: Lock (default) – Lock keeps your encrypted vault on the device and asks for your master password, PIN or biometrics to open it. Log out removes the vault data, so you need your master password and two-step login again. I’d use Log out only on a computer you don’t own.
Master password
Master password: a long passphrase – Everything depends on it, and Bitwarden cannot reset it. If you forget it, your vault is gone. Use four to six random words you don’t use anywhere else, and keep a written copy somewhere safe at home.
Log in with passkey: DEPENDS – You can add up to five passkeys to log in to Bitwarden itself. A passkey is a login stored on your phone, computer or hardware key, so there is no password to steal. If your browser and passkey support a feature called PRF, the passkey can also unlock your vault (“Use for vault encryption”). Bitwarden says this works in the web app and in the extension on Chromium browsers. Convenient, but it is one more way into your vault, so protect each passkey well.
Two-step login
Two-step login: ON – The most important setting in this guide, and it is off until you turn it on. It asks for a second proof, like a code from your phone, after your master password.
| Method | Plan | My view |
|---|---|---|
| FIDO2 WebAuthn (security keys like YubiKey) | Free | Best. Phishing-resistant. Register two keys. |
| Authenticator app | Free | Good. Use a separate app, not Bitwarden itself. |
| Free | Weakest. Only if nothing else works. | |
| Duo Security | Premium | Good if you already use Duo. |
| YubiKey OTP | Premium | Fine, but FIDO2 is the better choice. |
Keep the codes for Bitwarden outside Bitwarden. If they are inside your vault, you can’t reach them when you are locked out.
Recovery code: SAVE IT NOW – After turning on any method, click View recovery code and print it. If you lose your phone or key, this code logs you in and switches off all your two-step methods. You then get a new code, so save that one too (Bitwarden).
Devices
A list of every device your account has logged in on. Bitwarden’s own text says: “If you do not recognize a device, remove it now.” I’d check it every few months and remove old phones and computers.
Keys (encryption settings)
This tab controls the KDF (key derivation function), which turns your master password into your encryption key. It is slow on purpose, so anyone who steals your encrypted vault needs much longer to guess your password.
| Algorithm | Default values | Notes |
|---|---|---|
| PBKDF2 SHA-256 | 600,000 iterations (also the minimum) | Older and well tested. Uses only processor time. |
| Argon2id | 32 MiB memory, 6 iterations, 4 parallelism | Newer. Also needs memory, which makes attacks with graphics cards much harder. |
Algorithm: Argon2id – Privacy Guides says Bitwarden uses PBKDF2 by default and recommends Argon2id. A Bitwarden staff member wrote on the community forum that Argon2id with default values is roughly 10 times stronger against graphics-card attacks than PBKDF2 at 600,000. In March 2026 staff said work was in progress to make it the default for new accounts.
Keep Bitwarden’s default Argon2id values. Bitwarden warns that higher values slow down login and unlocking on older devices, and above 64 MiB of memory iPhones show a warning when autofill starts. Change values in small steps and test on all your devices.
If you stay on PBKDF2, Bitwarden has enforced at least 600,000 iterations since version 2026.2.1 and raises older accounts automatically when you unlock with your master password.
API key: leave alone – Only for logging in to the Bitwarden command line tool (CLI) from scripts. If you think it leaked, use Rotate API key.
Web App: Appearance, Domain Rules and Subscription
Appearance: theme and language, personal preference.
Domain rules: leave alone unless needed – Tells Bitwarden that two different website addresses share one login. Only add a rule if autofill misses a login on a site where you know it should appear.
Subscription: since September 2026 it shows your next renewal amount, tax and date. Worth a look before you renew.
Emergency Access
Emergency access: ON (Premium) – Lets someone you trust ask for access to your vault if something happens to you. You need Premium or a paid Families plan, but the trusted person can use a free account. On the free plan, at least keep your master password and recovery code where your family can find them.
- View: read-only access to your personal vault, including attachments. My pick for most people.
- Takeover: they set a new master password, which replaces yours and removes your two-step login methods. Only for someone you would trust with your whole digital life.
Wait time: 7 days (default) – If you don’t answer their request, they get access after this wait. Options are 1, 2, 7, 14, 30 or 90 days. You can approve or reject a request at any time during the wait, so you have a chance to say no.
Browser Extension – Account Security
The extension’s Settings menu has Account security, Autofill, Notifications, Vault options, Appearance and About. You use the extension every day, so these settings matter most.
Unlock with biometrics: ON – Uses Windows Hello, Touch ID or your system login. Set up biometrics in the desktop app first. Windows desktop apps from the Microsoft Store don’t support it (Bitwarden). Ask for biometrics on launch is optional.
Unlock with PIN: DEPENDS – Handy without biometrics. Use a long PIN, not your birth date. After five wrong tries you are logged out. Bitwarden itself says a PIN can weaken the encryption of the vault stored on your device. If you use one, keep Require master password on browser restart: ON (default).
Sync unlock with desktop app / Sync unlock with web app: DEPENDS – The extension and the desktop app (or web app) lock and unlock together. It saves typing if you keep both on the same computer.
Session timeout: 15 minutes – The extension default is On browser restart, so your vault can stay unlocked all day while the browser is open. I’d set 15 minutes instead. Other options: Immediately, On system idle, On system sleep, On system lock, Never and Custom. Avoid Never. Bitwarden says it stores your encryption key unencrypted on the device.
Timeout action: Lock (default) – Log out only makes sense on a shared computer.
Phishing detection: ON (Premium) – In the new Phishing Blocker section. It warns you before you open a site on “an open-source list of known phishing sites”. It is on by default for Premium users in Bitwarden’s code. I’d still check the address bar yourself before typing anything.
Manage devices, Fingerprint phrase, Two-step login, Change master password – Shortcuts to the settings covered above.
Browser Extension – Autofill
Make Bitwarden your default password manager: ON – Since mid-2026 the extension offers this on install. Turn off the browser’s own password saving too, so the two don’t clash.
Show autofill suggestions on form fields: ON – This is the inline menu, a small Bitwarden icon and list inside login fields. In August 2025 a researcher showed a “clickjacking” trick at DEF CON 33, where a hidden layer on a hacked site could turn your click into an autofill. Bitwarden fixed it in version 2025.8, so on a current version I’d keep it on. Under it:
- Display identities / cards as suggestions: ON if you store addresses or cards.
- Display SSH keys as suggestions: only if you store SSH keys.
- Display suggestions when icon is selected: ON – The list opens only when you click the icon, so fewer accidental fills.
Always show cards / identities as Autofill suggestions on Vault view: personal preference.
Autofill shortcut: Ctrl+Shift+L (Cmd+Shift+L on Mac) – Fills the matching login. Press again to cycle through several matches. Nothing happens until you ask, which makes it the safest way to autofill. Change it under Manage shortcuts.
Autofill on page load: OFF (default) – Fills your login as soon as the page loads. Bitwarden’s own warning: “Compromised or untrusted websites can exploit autofill on page load.” Leave it off.
Additional options:
- Turn on fill assist: DEPENDS (off) – Uses site-specific rules to fill tricky login pages. Bitwarden says “No data is collected or saved.” Turn on if autofill often misses fields.
- Allow websites to exclude fields to autofill and Allow websites to add fields to autofill: OFF (default) – Let websites mark fields for Bitwarden. I’d not give websites a say.
- Autofill browser login prompts: OFF (default) – Back as an opt-in in October 2026, for the plain pop-up login boxes some routers use. Bitwarden warns: “Websites can trigger these prompts without your knowledge, which may expose your credentials.” Only turn on if you need it.
- Show context menu options: ON (default) – Bitwarden in the right-click menu, useful when autofill fails.
- Copy TOTP automatically: ON (default) – Copies the two-step code after autofill (Premium).
- Clear clipboard: 1 minute – The default is 5 minutes. Copied passwords sit on the clipboard that long, where other apps can read them. 1 minute is enough to paste.
Default URI match detection: Base domain (default) – Decides when a saved login “matches” a website:
| Option | Matches | Use it for |
|---|---|---|
| Base domain (default) | example.com, including subdomains | Almost everything. |
| Host | Exact hostname and port | Subdomains that need different logins, or apps on a home server. |
| Starts with | URLs beginning with the saved one | Advanced. Bitwarden calls it “quite dangerous if used incorrectly”. |
| Regular expression | A pattern you write | Advanced, same warning. |
| Exact | Only that exact URL | Very strict. |
| Never | Nothing | Logins you never want offered. |
Keep Base domain as the default and change it per login when needed.
Blocked domains: DEPENDS – No autofill on the sites you list. Add any site where autofill causes problems.
Browser Extension – Notifications
Ask to save and use passkeys: ON – Bitwarden offers to store new passkeys and use them for logins. Passkey storage is free. Turn off only if you want passkeys to stay in your phone or computer’s own passkey manager.
Ask to add login: ON (default) – Offers to save new logins.
Ask to update existing login: ON (default) – Offers to update a saved password when you change it, which keeps your vault correct.
Excluded domains – Sites where Bitwarden should never ask to save.
Browser Extension – Vault Options and Appearance
Vault options holds Folders, Import, Export, Archive, Trash and Sync now. Archive (2026, paid plans) hides old logins from the vault list, search and autofill, but Privacy Guides notes they still appear in vault health reports. Good for old accounts you can’t delete.
Appearance is mostly taste: Theme, Extension width, Compact mode, Show animations. Three are worth a look:
- Show website icons and retrieve change password URLs: ON (default) – Site icons, plus a link to each site’s “change password” page.
- Show at-risk password notifications: ON – Warns you about passwords Bitwarden marks as at risk.
- Show number of login autofill suggestions on extension icon: ON (default) – A number on the icon tells you a saved login matches this site. If it is missing on what looks like your bank, check the address again.
Desktop App Settings
On Windows and Linux open File, then Settings. On a Mac open Bitwarden, then Settings.
Security
Session timeout: On system lock – The desktop default is On restart, which can keep the vault unlocked for days if you rarely restart. On system lock or 15 minutes is better.
Unlock with Windows Hello / Touch ID / system authentication: ON – Also needed for biometric unlock in the extension. On Linux it needs a polkit agent, and version 2026.10.2 added biometric unlock that survives a restart.
Unlock with PIN: DEPENDS – Same advice as the extension.
Require master password or PIN on app restart: ON (default) – Bitwarden warns that unticking it “means any application on your computer may unlock Bitwarden”. Leave it on.
Preferences
Clear clipboard: 1 minute. Minimize when copying to clipboard, website icons and quick copy actions are personal preference.
App settings (all accounts)
Keep Bitwarden running in the background: ON if you use browser biometrics or the SSH agent. Bitwarden recommends it for both.
Start automatically on login: DEPENDS (off) – On if you rely on the desktop app for browser biometrics.
Enable autotype shortcut: DEPENDS (off) – Types your login details into other apps with a shortcut. Bitwarden warns you must be in the correct field first.
Enable SSH agent: DEPENDS (off) – For developers who keep SSH keys in the vault. If you use it, keep Ask for authorization when using SSH agent on.
Allow screen capture: OFF (default) – Hides the Bitwarden window from screenshots and remote desktop sessions.
Allow DuckDuckGo browser integration: DEPENDS (off) – Only for the DuckDuckGo browser.
Passkey provider: DEPENDS – Since October 2026 the desktop app can save and use passkeys on Windows and macOS (on Windows only the Microsoft Store version). Turn on if you want Bitwarden, not Windows or Apple, to hold your passkeys.
Use hardware acceleration: ON (default) – Turn off only if the window shows graphics glitches.
Bitwarden Authenticator and TOTP
A TOTP code is the six-digit code that changes every 30 seconds. Saving the key in a login is free, but showing the codes needs Premium or a paid organization (Bitwarden). There is also a separate free app, Bitwarden Authenticator, which can sync its codes into the password manager.
Integrated authenticator: DEPENDS – Very convenient, because the code is copied right after autofill. The trade-off, as PasswordGeeks points out, is that password and second factor sit in the same vault. My rule: use it for everyday accounts, but keep the codes for your email, your bank and Bitwarden itself in a separate app or on a security key.
Send
Send shares text or a file through an encrypted link. Text Sends are free (up to 1,000 characters). File Sends need Premium (up to 500 MB, 100 MB on mobile). Every Send is deleted after 31 days at most. For each Send:
- Deletion date: as short as possible, for example 1 day.
- Maximum access count: 1 or 2 if only one person needs it.
- Password: ON, shared through a different channel, like a phone call.
- Hide text: ON for passwords, so the text stays hidden until they click.
- Hide email: DEPENDS – Hides your email address from the recipient.
You can also limit a Send to people who verify their email address.
Export and Backups
Keep your own copy of your vault. In the web app go to Tools, then Export.
Format: .json (Encrypted), Password protected – Account restricted exports can only go back into the same Bitwarden account, which is useless if you lose that account. Password protected works with any account. Use a strong, separate password.
Plain .json and .csv exports are not encrypted, so anyone who finds the file can read every password. Avoid them, or delete them right after use. Also know what is missing (Bitwarden):
- Attachments: only in the .zip (with attachments) export.
- Passkeys: only in .json exports.
- Sends and Trash: never included.
I’d export every few months and keep the file on an encrypted USB stick, not in a cloud folder.
Self-Hosting
Self-hosting: DEPENDS – The official option for home use is Bitwarden Lite (called Bitwarden Unified until December 2025): a single Docker container that needs about 200 MB of RAM and runs on a Raspberry Pi or NAS (Bitwarden). Some home users run Vaultwarden, an unofficial community server that works with the Bitwarden apps. For most people I’d stay on Bitwarden’s cloud. With your own server, updates, backups and security are all your job.
Plans and Pricing
| Plan | Price (2026) | What you get |
|---|---|---|
| Free | $0 | Unlimited passwords and devices, passkeys, encrypted export, Send, sharing with one other user |
| Premium | $19.80 a year ($1.65 a month) | Adds TOTP codes, 5 GB attachments, emergency access, vault health reports, Duo and YubiKey OTP |
| Families | $47.88 a year ($3.99 a month) | Six Premium accounts, unlimited sharing |
Prices rose in January 2026: Premium from $10 to $19.80 a year, Families from $40 to $47.88 (Thurrott). Existing subscribers got 25% off their first renewal at the new price. Check current prices. AllAboutCookies reports a 7-day free trial on paid plans and refunds within 30 days.
Trust Notes for 2026
- Licence change: Bitwarden announced on 9 October 2026 that app store and website downloads will be the “commercially licensed builds”, and that some future features will exist only in that version. The GPLv3 version stays on GitHub, and staff say there is “no change to self-hosting”. IT-Connect expects the two versions to drift apart. One Privacy Guides forum user called it a “yellow flag”, and several agreed there is no need to switch yet. I agree, and I’ll keep watching.
- Wording: in May 2026 the phrase “Always free” briefly disappeared from the website before it was put back (Linuxiac).
- CLI incident: on 22 April 2026 a malicious copy of the Bitwarden command line tool (2026.4.0) was on npm for about 90 minutes. Bitwarden found “no evidence that end user vault data was accessed or at risk” (BleepingComputer).
Who Is Bitwarden For?
Bitwarden suits most people who want a password manager they can trust without paying much. It has one of the most generous free plans around, apps for every platform, open-source code, regular outside audits and the option to host it yourself. Premium at $19.80 a year is still cheap for TOTP codes and emergency access.
It is not the most polished app. Reviewers such as TechSifted and AllAboutCookies call the interface plain or less intuitive, and autofill does not work on every site. Free sharing is limited to one other person. If you want the smoothest design and don’t mind paying more, look at 1Password. If the 2026 price and licence changes worry you, keep an eye on them, but for now nothing has changed in how the apps work.
For the full comparison, see my best password managers guide. If you are leaving LastPass, read my LastPass review first. My other settings guides cover Proton VPN, NordVPN and Bitdefender.
Did I Miss Anything?
I am always looking to improve my tutorials and will listen to any suggestions you have in the comments.
Cheers,
Mefat



Comments 0
No comments yet. Questions, corrections and your own experience are all welcome.