Surfshark is easy to live with straight after install, but a few of its defaults are not what I would pick. According to Security.org you have to switch the kill switch on yourself on Windows, and when it is on it starts in “Soft” mode, which one tester caught leaking traffic while Windows was starting up. Below is my recommended configuration for Surfshark VPN in 2026, screen by screen, matching the current Windows app (version 6.21.0, released 27 October 2026). Where macOS, Android or iOS work differently, I say so.
Surfshark is run by Surfshark B.V. in Amsterdam, in the Netherlands, and has been part of Nord Security, the company behind NordVPN, since the two merged in 2022. The two brands still run their own apps and servers. The Netherlands belongs to the Nine Eyes intelligence-sharing group, which is part of the wider 14 Eyes, but it has no law that forces VPNs to keep logs. Deloitte checked Surfshark’s no-logs policy in January 2023 and again in June 2025, and SecuRing tested its server infrastructure in late 2025, finding two medium-severity issues that Surfshark fixed. In September 2026 an outsider got into a misconfigured internal test server. Surfshark’s incident report says “no user data and VPN services were affected” and that “no user action is required”. The apps are not open source. The big practical draw is that one subscription covers unlimited devices at a budget price.
If you want to compare Surfshark with NordVPN, Proton VPN, Mullvad and the rest, see my best VPN services guide. This article sticks to the settings inside the app.
If a setting doesn’t match what you’re seeing, you are probably on a different version than this guide. Leave a comment and I’ll do my best to help.
ON: enable it.
OFF: disable it.
DEPENDS: the right call depends on your setup.
TEST: worth confirming on your own machine before you trust it long term.
My recommended setup:
- WireGuard (or Automatic, which normally picks it)
- Kill Switch ON in Strict mode, so nothing leaks when Windows starts
- CleanWeb ON, with a browser ad blocker as well
- Auto-connect ON with no trusted networks, plus Launch app on startup
- Bypasser OFF unless an app breaks
- Rotating IP OFF and NoBorders left on automatic
Surfshark Dashboard
The big button is Quick-connect. By default it connects you to the fastest nearby location, and the Change button next to it lets you pick a different target. You can set the same thing in Settings > VPN settings > Quick-connect.
Pause VPN – Instead of disconnecting, you can pause the VPN for 5 minutes, 30 minutes or 2 hours, and it turns itself back on after that. This is handy when one site refuses VPN connections. I prefer it over disconnecting because you can’t forget to turn the VPN back on.
Refresh (beta) – Moves you to another server in the same country without picking it by hand. VPNAlert says it only works with WireGuard. Use it if a server feels slow or a site blocks that IP address.
The location list has a MultiHop tab (covered below), Static IP servers that give you the same IP address every time you connect, and your Dedicated IP if you pay extra for one (from about $3.75 a month). vpnMentor says P2P servers aren’t clearly labelled, and Gizmodo points out there is no port forwarding, which matters if you seed on private torrent trackers.
Speed test (Settings > VPN settings > Speed test) runs a test against recommended, favourite or recent locations. It is useful once, to find the best nearby server, then you can forget about it.
Expect some pop-ups. Engadget complained that the Windows app shows unskippable pop-ups when you cancel a stuck connection, change settings or close the app, and Gizmodo found that sidebar icons often open upgrade prompts instead of features.
Settings – VPN Settings
Almost everything that matters is on this one screen. Open the Settings tab, then VPN settings.
Auto-connect: ON
Auto-connect connects the VPN “as soon as it finds a Wi-Fi or ethernet connection.” Under its Preferences you choose where it connects: the fastest server, the nearest server, a specific country or city, a Static IP or a MultiHop pair. Engadget says it is on by default, and I would keep it that way.
Trusted networks: none – This list sits inside the Auto-connect preferences. On a trusted network, Surfshark says, “the VPN connection will not be used.” Everything you do there goes past the VPN, so your internet provider sees it. I leave the list empty. If you really want your home Wi-Fi trusted, add only that one network. On Windows and macOS you can only trust Wi-Fi networks; on Android and iOS you can also trust mobile data. Trusted networks only work when Auto-connect is on.
Mac users on macOS 27 should update to app version 4.30.1 or later, which fixed trusted Wi-Fi networks not being recognised.
Launch app on startup: ON
Surfshark opens when Windows starts. Together with Auto-connect, your PC gets onto the VPN without you doing anything.
Protocol: WireGuard (or Automatic)
A protocol is the method the app uses to build the encrypted tunnel. VPNAlert reports that the default is Automatic, which normally picks WireGuard and falls back to something else if a network blocks it. Either Automatic or WireGuard is a good choice. I would only force OpenVPN when a network won’t connect.
| Protocol | When to use it |
|---|---|
| Automatic | Default. Lets the app choose. Fine for most people. |
| WireGuard | Fastest, and the one you want for daily use. Needed for Everlink and Refresh. |
| OpenVPN (UDP) | Backup if WireGuard won’t connect. Turns on Camouflage Mode. |
| OpenVPN (TCP) | Strict networks that only allow web traffic. Much slower. |
| IKEv2 | Gone from Windows. Surfshark says it “is no longer available in the Surfshark Windows app.” |
| Dausos | Surfshark’s own new protocol. macOS only for now. |
Gizmodo’s numbers on a UK server show the difference: WireGuard 186.96 Mbps, OpenVPN UDP 185.56 Mbps and OpenVPN TCP only 87.51 Mbps. Across its tests WireGuard lost about 9.6% of download speed on average.
Post-quantum WireGuard – “Post-quantum” means encryption designed to survive future quantum computers. In October 2026 Surfshark announced a fully post-quantum version of WireGuard. Its own protocols page lists it for macOS, Android and Linux, and the October release note named macOS and iOS first. Reports disagree on whether Windows has it yet. It does not apply to manual WireGuard setups.
Everlink – With WireGuard, Surfshark also connects you to Everlink, its “self-healing” system. If the server you use fails, Everlink moves the tunnel to a working server instead of dropping you. Surfshark says it is on by default with WireGuard on every platform, and it only works with WireGuard, so you lose it if you switch to OpenVPN. Surfshark describes Everlink as something separate from the kill switch, so I keep both.
Kill Switch: ON, Strict
A kill switch blocks your internet if the VPN drops, so your real IP address and traffic don’t leak. It is the most important setting in the app, and according to Security.org you have to set it up by hand on Windows.
When you switch it on, you get two modes. These are the descriptions AllAboutCookies copied from the app:
- Soft kill switch: “Disables all internet access if your VPN disconnects by accident or is interrupted.” If you click Disconnect yourself, your internet comes back without the VPN.
- Strict kill switch: “Disables all internet access unless you’re connected to a VPN.”
I recommend Strict. Gizmodo found that “On the default setting, Soft mode, traffic left the computer during startup”, before Surfshark had connected. With the cable pulled or the app process killed, no packets escaped. The trade-off is the usual one: with Strict on, if you disconnect on purpose you have no internet at all until you reconnect or switch the kill switch off. It is easy to mistake that for a fault.
Security.org saw Surfshark cut the internet the moment a torrent connection dropped. But AllAboutCookies caught DNS requests (the lookups that turn site names into addresses) going to its internet provider while it switched from a Canada server to a Mexico server, in both modes. TEST: if you switch servers often, run a DNS leak test such as ipleak.net during a switch on your own PC.
On Android, I’d also turn on the system’s “Always-on VPN” and “Block connections without VPN”.
CleanWeb: ON
CleanWeb blocks ads, trackers, malware and phishing sites at the DNS level, so it covers every app on your PC, not only the browser. It only works while the VPN is connected.
Reviewers describe CleanWeb in the VPN app as a single on/off switch. The more detailed CleanWeb 2.0, with separate switches for Ad blocker, Cookie pop-up blocker, Data breach alert and Malware alert, lives in the Surfshark browser extension, not the VPN app.
Gizmodo measured CleanWeb blocking 107 of 135 test domains (79%), and the app shows no counter of what it blocked. AllAboutCookies says YouTube ads are only blocked by the CleanWeb 2.0 extension, not the apps. I keep CleanWeb on as a first layer and add uBlock Origin in the browser. If a site breaks, turn CleanWeb off for a moment to see if it is the cause.
The separate Web content blocker, which blocks whole categories of websites, is part of the paid Surfshark One bundle, not the VPN. So is Surfshark Antivirus, which I cover separately with the other antivirus software.
Bypasser: OFF
Bypasser is Surfshark’s name for split tunneling: choosing which apps or sites use the VPN. Keep everything inside the VPN unless something breaks. If you need it, there are two modes:
- Bypass VPN: everything uses the VPN except the apps and websites you pick. This is the easiest to manage. Use it for a banking app or a game that refuses VPN connections.
- Route via VPN: only the apps you pick use the VPN; everything else goes over your normal connection.
Click Select apps to tick apps, or Add apps to point at an app’s .exe file. The Websites / IP addresses tab lets you add sites or IP addresses that skip the VPN (this only works in Bypass VPN mode). Reconnect to a server afterwards, otherwise the changes don’t apply. Remember that anything you bypass shows your real IP address and location.
Rotating IP: OFF
Rotating IP (some reviewers call it IP Rotator) changes your IP address every 5 to 10 minutes without disconnecting you. It runs on Nexus, Surfshark’s system that links all of its servers into one network, so your IP can change while your apps stay connected. Surfshark says it is “not enabled by default”.
On Windows it only rotates between addresses in the same location. On macOS you can choose a wider range under Advanced settings: City, Country, Region or Worldwide. Surfshark’s macOS help page says Rotating IP does not work with Dedicated IP, Static IP or MultiHop servers.
It does make you a little harder to track across sites, but PCWorld notes it can slow things down now and then, and sites that link your login to an IP address may see each change as a new location. I leave it off and turn it on only for a session where I want it.
Invisible on LAN: DEPENDS
This hides your device from other devices on the same local network (LAN), such as a hotel or café Wi-Fi. Surfshark’s Windows guide lists it under VPN settings. The catch is that it also stops you reaching your own printer, NAS (network storage), smart TV or speakers.
Turn it on when you’re on public Wi-Fi. Leave it off at home if you need your local devices. Surfshark’s support page about this feature focuses on Apple devices, where it guards against local network leak attacks known as TunnelVision and TunnelCrack, and says its Windows, Android and Linux apps are not affected by those. On Windows, then, the reason to use it is privacy on shared networks.
Quick-connect
Choose which location the Quick-connect button uses: fastest, nearest, or a set country. Fastest is fine for most people. Pick a local country if you always want a home-country IP for banking or local streaming.
Settings – Advanced Settings
Scroll to the bottom of VPN settings to find Advanced Settings.
NoBorders: ON (default, automatic) – NoBorders helps you connect on networks that block VPNs, such as some schools, offices and countries with censorship. Surfshark says “If Surfshark app detects any restrictions on your network, it automatically enables the NoBorders,” and then shows a shorter list of servers that work there. Engadget and Gizmodo both report it on by default. Engadget found it “sometimes activates when you don’t need it”, while Gizmodo saw no speed difference with it off. I leave it on. TEST: if connections feel odd on your home network, switch it off and compare.
Camouflage Mode (no toggle) – Camouflage Mode is Surfshark’s obfuscation, which disguises VPN traffic as ordinary HTTPS web traffic so your network can’t easily tell you’re using a VPN. There is no switch for it. It turns on by itself whenever you use OpenVPN, and does nothing on WireGuard. So if a network blocks you, the fix is to change the protocol to OpenVPN UDP, then OpenVPN TCP.
Camouflage slows things down. Gizmodo measured ping on TCP with Camouflage rising to 149 ms while downloading and 851 ms while uploading. It also only hides the VPN from your network. Websites can still tell: people on the Privacy Guides forum point out that sites spot VPNs by their IP addresses, which no obfuscation changes. vpnMentor says Surfshark’s own support told it the VPN doesn’t work reliably in China, Russia or Turkey, so don’t count on it there.
MultiHop and Dynamic MultiHop
MultiHop: DEPENDS – MultiHop (a “double VPN”) sends your traffic through two Surfshark servers in different countries. The first server sees your real IP but not where you’re going. The second sees where you’re going but not who you are.
Open the MultiHop tab in the location list. You can use ready-made server pairs, or click Create Connection to pick both the entry and the exit server yourself. This is the feature Surfshark launched as Dynamic MultiHop.
The speed cost is small on WireGuard. Gizmodo measured 181.59 Mbps on MultiHop against 186.96 Mbps on a single UK server, but connecting took about 10 seconds instead of 4 to 5. Use it for sensitive work or when connecting from a network you don’t trust. It doesn’t work together with Rotating IP. For streaming and gaming, stick to a single server.
Custom DNS
Custom DNS: OFF – DNS turns website names into addresses. Surfshark’s own DNS goes through the tunnel, and CleanWeb works at the DNS level, so a different resolver may bypass it. I could not find a custom DNS option in the Windows app. Surfshark’s own guide changes DNS in the Windows network adapter settings instead, including the “Surfshark Data Channel Offload” adapter. Only do that if you deliberately want your own resolver, such as a NextDNS profile, and run a DNS leak test afterwards.
Settings – App Settings
App version – Shown here. Check it against this guide if a setting looks different.
Dark mode and Language: personal preference.
Send crash reports: OFF (or ON if you are happy to help Surfshark fix bugs) – A privacy tool doesn’t need to send data back by default, and switching this off costs you nothing.
Restore original settings (Settings > Help > Diagnostics) – If toggles like Auto-connect, Kill Switch or the LAN setting refuse to change, Surfshark suggests restarting the app, then Windows, then using this button, then reinstalling. Note that it puts every setting in this guide back to default.
Platform Differences
- macOS: has the Dausos protocol and post-quantum WireGuard, and extra Rotating IP ranges.
- Android: adds Small packets (smaller data packets that may help speed on poor connections) and Override GPS location. Both are Android-only. Trusted networks can include mobile data.
- iOS: you can’t choose an Auto-connect location; it uses the last one you connected to.
- Windows: no IKEv2 and no Dausos.
Account Security
Two-factor authentication: ON – 2FA means you need a second code as well as your password to sign in. Log in at surfshark.com, open Account Settings and click Edit next to 2FA. You can use an authenticator app such as Google Authenticator or Authy, or a code sent by email. Pick the authenticator app, because anyone who gets into your email would get the codes too. Save the recovery codes it gives you. Turning on 2FA logs you out, so have your password ready.
Plans: every paid plan covers unlimited devices. The VPN features in this guide are all in Starter. One adds Antivirus, Alert (data breach monitoring) and the Web content blocker, and One+ adds Incogni data broker removal. US prices in October 2026, before tax, per Gizmodo and CyberInsider:
| Plan | First 27 months | Renews at |
|---|---|---|
| Starter | $2.49/month ($67.23) | $79/year |
| One | $2.79/month ($75.33) | $99/year |
| One+ | $4.49/month ($121.23) | $119/year |
The monthly plan costs $16.45 for Starter. The renewal price is more than double the first-term price, and Gizmodo notes Surfshark “may test different renewal prices”, so check before your plan renews or switch off auto-renewal. Prices also differ by country and currency. Check current prices. Every plan has a 30-day money-back guarantee.
Who Is Surfshark For?
Surfshark suits households and people on a budget who want one subscription for every phone, laptop and TV they own. It is fast on WireGuard, has an audited no-logs policy, RAM-only servers, and handy extras like Bypasser for websites, Rotating IP and Dynamic MultiHop. Once the kill switch is on Strict, it is a solid everyday VPN.
It is not my pick if privacy is your top priority. It is a closed-source app from a company owned by Nord Security in a Nine Eyes country, it keeps your IP address for 15 minutes after a session, and the Privacy Guides community does not recommend it. It also has no port forwarding, the kill switch has failed at least one independent test, and vpnMentor was told by Surfshark’s support that it doesn’t work reliably in China, Russia or Turkey. If you need to beat serious censorship, look elsewhere.
For maximum anonymity and quantum-resistant tunnels, see my Mullvad settings guide. For a Swiss, open-source option, see my Proton VPN settings guide. Surfshark’s sister app is covered in my NordVPN settings guide. For the full comparison, see my VPN comparison guide.
Did I Miss Anything?
I am always looking to improve my tutorials and will listen to any suggestions you have in the comments.
Cheers,
Mefat



Comments 0
No comments yet. Questions, corrections and your own experience are all welcome.