Skip to content

IVPN Settings 2026: Firewall, AntiTracker and Multi-Hop Explained (Plus What to Leave Alone)

Summarize with AI

IVPN gets the basics right out of the box. WireGuard is the default protocol, the firewall (IVPN’s name for its kill switch) switches on automatically when you connect, and your WireGuard keys change every day. But a few things I care about are off by default: AntiTracker, the Always-on firewall, auto-connect and the Wi-Fi rules. Below is my recommended IVPN configuration for 2026, screen by screen, for the current Windows app (version 3.15.15, released 3 September 2026).

IVPN is run by IVPN Limited (formerly Privatus Limited) in Gibraltar. You sign up without an email address, get an Account ID, and can pay with cash, Monero or Bitcoin. The apps have been open source since February 2020, and Privacy Guides lists IVPN as one of its recommended VPNs. Cure53 checked its no-logs claims in 2019, and IVPN has commissioned a yearly security audit from Cure53 since then. The eighth one was scheduled for July 2026. In August 2026 attackers used a zero-day bug in IVPN’s Bitcoin payment server software to take IVPN’s own operating funds. IVPN says no customer data was accessed and the VPN servers were not involved.

To compare IVPN with NordVPN, Mullvad, Proton and the rest, see my best VPN services guide. This article sticks to the app’s settings.

If a setting doesn’t match what you’re seeing, you are probably on a different version than this guide. Leave a comment and I’ll do my best to help.

ON: enable it.
OFF: disable it.
DEPENDS: the right call depends on your setup.
TEST: worth confirming on your own machine before you trust it long term.

My recommended setup:

  • WireGuard with daily key rotation and quantum resistance (both default)
  • Always-on firewall so nothing leaks, even before the app starts
  • AntiTracker ON with the Comprehensive block list, Hardcore Mode off
  • Launch at login plus Autoconnect on launch
  • Wi-Fi control set to connect and block LAN traffic on untrusted networks
  • Multi-hop only for sensitive work

IVPN Dashboard

The big toggle connects you to the fastest server unless you pick one. Under Connection details you get two switches you will use often, Firewall and AntiTracker (both covered below), plus the protocol, port and Wi-Fi network name.

Single-hop / Multi-hop: DEPENDS – Multi-hop sends your traffic through two IVPN servers, an entry server and an exit server, ideally in different countries. The entry server sees your real IP but not where you go, and the exit server the other way round. You choose both servers yourself. Since May 2026 Multi-hop is included in every plan, Standard included. It is slower than a single hop, so I keep it for sensitive work and leave it off for streaming or gaming.

Pause – When connected, you can pause the VPN for 5 minutes, 30 minutes, 1 hour or 3 hours, and it reconnects by itself. When a site refuses VPN traffic, I’d pause rather than disconnect, because you can’t forget to turn it back on.

Since September 2026 the app runs automatic health checks on WireGuard connections, and the status can show “Unhealthy connection.”

Settings – Account

This screen shows your Account ID, Device Name, Subscription and Active until date. There is no email and no password. The Account ID is your login, so treat it like a password. You can blur it on screen, which helps when you share your screen or take screenshots.

Log out – Do this before you sell or wipe a computer.

Settings – General

Launch at login: ON – IVPN starts with Windows, which auto-connect needs after a restart.

Show application icon in system dock: OFF (default) – Personal preference. IVPN lives in the system tray.

Minimize to tray: ON (default) – Closing the window keeps the app running in the tray.

Connect to location when selecting it on map screen: OFF (default) – When on, clicking a location connects straight away. I prefer to pick first, then connect.

Enable selection of individual servers in server selection list: DEPENDS (off by default) – Lets you pick a specific server inside a city. Useful for Multi-hop, if you want to avoid two servers run by the same company. Most people can leave it off.

View and Tray icon: personal preference.

Autoconnect – On launch: ON – Off by default. With Launch at login, your PC goes online through the VPN after every restart.

Allow background daemon to manage autoconnect: ON – Off by default. The daemon is the background service that runs the tunnel. It starts early in the Windows boot, before the app window, so with this on the tunnel comes up as early as possible. While it is on, the app won’t let you turn off Launch at login.

On exit – Quit without confirmation when closing application: OFF (default) – Keeps the prompt that stops you quitting by accident.

Disconnect when closing application: ON (default) – Quitting IVPN also drops the VPN. With the Always-on firewall (below), quitting leaves you offline instead of exposed.

Allow logging: OFF (default) – Diagnostic logs on your own PC. Turn it on only when IVPN support asks for logs, then off again.

Notify beta version updates: OFF – The app itself warns that “Beta versions can break and change often”.

Settings – Connection

VPN protocol: WireGuard (default) – Fast, modern and small. OpenVPN is slower but useful on networks that only allow TCP, or for the obfs4 options below.

ProtocolWhen to use it
WireGuardDefault. Best for almost everyone.
WireGuard + V2RayNetworks that block or slow down VPNs. Slower.
OpenVPNNetworks that only allow TCP, or when WireGuard won’t connect.
OpenVPN + obfs4Censored networks where V2Ray doesn’t work. Slowest.

Enable IPv6 in VPN tunnel: OFF (default) – IPv6 is the newer internet address format. With this off, the firewall still stops IPv6 leaks. Privacy Guides notes that IVPN’s IPv6 support is limited: you can reach IPv6 sites, but you can’t connect to IVPN from an IPv6 address. Only turn this on if you need an IPv6-only service.

Show servers without IPv6 support: ON (default) – Only matters with IPv6 enabled. Leave it.

WireGuard configuration

Preferred port: UDP 2049 (default) – If a hotel or office network blocks it, try another port or a TCP option before reaching for obfuscation.

Rotate key every: 1 day (default) – WireGuard uses a fixed key per device, which on its own could link your sessions together, so IVPN creates a new key pair and internal IP address on a schedule. IVPN’s WireGuard page says its servers also delete your connection details once you have been inactive for 180 seconds. You can stretch it to 30 days, but one day is the shortest interval and the one I’d keep.

Obfuscation: Disabled (default) – Obfuscation disguises VPN traffic as normal web traffic, so firewalls that block VPNs let it through. The app’s own advice is “Only enable if you have trouble connecting.” For WireGuard there are two choices:

  • V2Ray (VMESS/QUIC): makes your traffic look like normal HTTPS. Try this first.
  • V2Ray (VMESS/TCP): makes it look like plain HTTP. Try this if QUIC doesn’t connect.

IVPN says which one works better depends on your location and network, and recommends trying both. Expect lower speeds. In Top10VPN’s tests, IVPN’s obfsproxy obfuscation cut speed by 45% and could not connect from China, so don’t count on it in the most censored countries.

Custom MTU: blank (default) – MTU is the maximum packet size. Only change it if IVPN support tells you to, because a wrong value can break the tunnel.

WireGuard key information

This panel shows your current key, when it was generated, the next rotation date, and Quantum Resistance, which should say Enabled. There is no switch for it. Enabled means your connection carries an extra shared key, exchanged using Kyber-1024 and Classic McEliece, two methods designed to resist future quantum computers. IVPN says it is on by default in all its apps and does not slow you down. It also admits this doesn’t make the connection fully quantum-proof, because the rest of WireGuard still uses classic cryptography.

Regenerate – Creates a new key now, for example if you think your device was compromised.

OpenVPN configuration

You only see these if you pick OpenVPN.

Preferred port: UDP 2049 (default) – Same advice as WireGuard.

Network proxy: None (default) – Only for networks where you must go through an HTTP or SOCKS proxy.

Obfuscation: Disabled – OpenVPN adds obfs4 options next to V2Ray. The app lists them from fastest and least hidden to slowest and most hidden:

  • obfs4: the basic version.
  • obfs4 (IAT1): splits large packets so they are harder to analyse.
  • obfs4 (IAT2): the “paranoid mode”. Splits packets into random sizes.

IAT costs speed and CPU, so use it only where plain obfs4 is blocked.

Add additional OpenVPN configuration parameters: OFF – The app warns that this “may affect the proper functioning and security of the VPN tunnel”. Leave it alone.

Settings – IVPN Firewall

A kill switch blocks your internet if the VPN drops, so your real IP never leaks. IVPN’s version, the IVPN Firewall, runs separately from the app, so traffic stays blocked even if the app crashes. On Windows it is built on Microsoft’s own Windows Filtering Platform. (IVPN’s firewall page)

Non-VPN traffic blocking: Always-on firewall – There are two modes:

  • On-demand (default): the firewall switches on when you connect and off when you disconnect. A dropped tunnel is covered, but clicking Disconnect brings your internet back without the VPN.
  • Always-on firewall: in the app’s words, it “is started during system boot time before any other process” and stays active “even when IVPN Client is not running”.

I recommend Always-on, so nothing leaves your PC before the VPN is up, including Windows updates and apps that start at boot. The trade-off: when you disconnect, you have no internet at all until you reconnect or switch the firewall off. In AllAboutCookies’ June 2026 test, the firewall held when switching servers, and the real IP never appeared. TEST: after you turn it on, restart your PC and check that nothing loads until IVPN connects.

On Mac and Linux, IVPN says boot-time protection “cannot be guaranteed to the same degree” as on Windows, because it depends on the order in which the system starts its services.

Allow access to IVPN servers when Firewall is enabled: ON (default) – Lets the app reach IVPN to log in and connect while everything else is blocked. Without it, Always-on may stop the app connecting at all.

On-demand Firewall

Activate IVPN Firewall on connect to VPN: ON (default) – This is why the kill switch works out of the box. Never turn it off. (This and the next option only matter in On-demand mode.)

Deactivate IVPN Firewall on disconnect from VPN: DEPENDS (on by default) – With this on, disconnecting gives you normal internet. Turn it off if you want the firewall to stay up until you switch it off on purpose.

LAN settings

Allow LAN traffic when IVPN Firewall is enabled: DEPENDS (off by default) – LAN means your local network: printers, network drives, smart TVs, speakers. With this off, the firewall blocks them. Turn it on at home if you need those devices, and leave it off on public Wi-Fi. The Wi-Fi control screen (below) can block LAN traffic on untrusted networks even when this is on.

Allow Multicast when LAN traffic is allowed: OFF (default) – Some devices use multicast to find each other, for example when casting to a TV. Turn it on only if that stops working.

Exceptions: empty – Lets specific IP addresses through the firewall. Leave it empty unless you know exactly why you need one.

Settings – Split Tunnel

Split Tunnel: OFF – Split tunneling lets some apps skip the VPN. Keep everything inside the VPN unless something breaks, such as a banking app or a game that refuses VPN connections. If you use it, the app lists a few catches:

  • Start apps from the app’s own add button. Apps already running keep using the VPN for open connections.
  • Close your browser fully before launching it as an excluded app.

Inverse mode (BETA): OFF – Flips it around, so only the apps you choose use the VPN and everything else goes over your normal connection. The app warns that “The IVPN Firewall is not functional when this feature is enabled.”, which rules it out for me. If you use it anyway:

  • Allow connectivity for Split Tunnel apps when VPN is disabled: OFF (default) – Keeps your chosen apps offline when the VPN is off.
  • Block DNS servers not specified by the IVPN application: ON – IVPN recommends keeping this on. With it off, AntiTracker and custom DNS stop working for those apps.

Split tunneling is available on Windows and Linux, and since version 3.16.1 (October 2026) also on macOS, where you choose apps that bypass the VPN. Top10VPN also lists it on Android, but not on iOS.

Settings – Wi-Fi Control

This is IVPN’s version of trusted networks and auto-connect rules.

Allow background daemon to Apply Wi-Fi Control settings: ON – Off by default. The rules apply as soon as Windows starts.

Autoconnect on joining Wi-Fi networks without encryption: ON – Off by default. When you join an open network, like many café or airport hotspots, IVPN connects for you.

Trusted/Untrusted Wi-Fi network control: ON – Off by default. Lets you mark each Wi-Fi network as Trusted or Untrusted and choose what happens when you join it. Set the default trust status to Untrusted, so any network you haven’t marked yourself is treated as unsafe.

Actions for Untrusted Wi-Fi:

  • Connect to VPN: ON
  • Enable firewall: ON
  • Block LAN traffic: ON – This overrides “Allow LAN traffic” from the firewall screen, so other people on the hotel network can’t reach your PC.

Actions for Trusted Wi-Fi:

  • Disconnect from VPN: OFF
  • Disable firewall: OFF

Both are on by default. I wouldn’t let any network drop the VPN, including home, because your internet provider sees everything when the VPN is off. With both actions off, trusted status only stops LAN blocking at home.

These rules cover Wi-Fi only. On a cable connection, rely on Autoconnect on launch.

Settings – AntiTracker

AntiTracker blocks ads, trackers and malicious sites through IVPN’s own DNS servers. DNS is the internet’s phone book, so blocking happens before a page can load the bad content, and it covers every app on your PC. It only works while you are connected to IVPN. It is off by default; you turn it on with the AntiTracker switch on the main screen.

AntiTracker: ON

Block list: Comprehensive – IVPN offers three ready-made combinations of well-known public block lists, or a single list of your choice:

  • Basic: light blocking that lets through services relying on some tracking.
  • Comprehensive: my pick. IVPN’s balance between privacy and usability, adding lists such as OISD Big and HaGeZi Multi Normal to Basic.
  • Restrictive: heavy blocking. IVPN warns that “Some online services may break.”

Hardcore Mode: OFF – Blocks every domain owned by Google and Facebook (Meta). IVPN’s own Hardcore FAQ says YouTube, Facebook, Instagram, Gmail and Google Search will stop working, and WhatsApp may only partly work. In Top10VPN’s tests, Hardcore Mode blocked 100% of intrusive ads. Only turn it on if you are ready to cut Google and Meta out of your life.

Like any DNS blocker, AntiTracker can’t remove ads served from the same domain as the content, and Top10VPN measured 67% tracker blocking, so keep uBlock Origin in your browser too. If a site breaks, switch AntiTracker off from the main screen for a moment.

Settings – DNS

Use custom DNS server when connected to IVPN: OFF (default) – IVPN’s own DNS already keeps your lookups inside the tunnel. Use custom DNS only if you prefer your own resolver, for example a NextDNS profile. Since version 3.15.0 you can add several servers, each with optional DNS over HTTPS (DoH), which encrypts your lookups. Ready-made DoH settings are included.

The app also notes that AntiTracker overrides custom DNS when both are on, so pick one.

  • Portmaster: IVPN bought Safing, the company behind the Portmaster firewall, in December 2024. An IVPN staff member explained on the Privacy Guides forum that if Portmaster is running with its own DNS servers, IVPN hands DNS over to Portmaster and AntiTracker and custom DNS are disabled. Clear the DNS list in Portmaster if you want IVPN’s settings to apply.
  • modDNS: IVPN’s separate DNS filtering service, in the Plus and Pro Suite plans. It gives you more control than AntiTracker, with your own allow and block rules. If you set modDNS up for the whole system, it is used instead of IVPN’s DNS.

Settings – Advanced

Enhanced App Authentication (EAA): DEPENDS – Adds a password between the IVPN app and its background service, so a malicious program can’t switch off or change your VPN without your permission. You then type the EAA password every time the app starts. I’d turn it on for a shared PC or a work laptop; on a single-user home PC it is optional. Keep the password somewhere safe.

Show server ISP info: ON – Off by default. Shows which hosting company runs each server, which helps with Multi-hop.

Warn me when selecting entry and exit servers located in the same country: ON (default) – Multi-hop is meant to cross borders, so someone would need access to data centres in two countries to trace you.

Warn me when selecting entry and exit servers operated by the same ISP: ON – Off by default. Two hops at the same hosting company protect you less than two hops at different ones.

Mobile Differences

  • iOS: IVPN’s firewall is only available up to iOS 15. IVPN removed it on newer versions because of an Apple issue that leaks your IP. There is also no split tunneling on iOS.
  • Android: split tunneling is available.
  • Both: WireGuard, Multi-hop and quantum-resistant keys are available on mobile too. On mobile, the WireGuard key details live under Settings > WireGuard.

Account Security

Two-factor authentication: ON – IVPN supports 2FA with any authenticator app (TOTP). Turn it on in the Client Area under Account settings, scan the code, enter the 6-digit number and store the backup codes somewhere safe. 2FA also applies when you log in to the apps, as long as your Account ID looks like i-XXXX-XXXX-XXXX. Older accounts (ivpnXXXXXXXX) need to ask support to switch.

Your Account ID is your only login, so store it in your password manager.

IVPN Plans and Prices

IVPN changed its plans in May 2026. The old Standard vs Pro choice is now three tiers:

PlanWeekMonthYearDevicesExtras
Standard$2$6$605VPN, AntiTracker, Multi-hop
Plus$3$8$805+ Mailx (email aliases), modDNS
Pro Suite$4$10$10010+ Portmaster Pro (Windows and Linux)

Existing Standard plans went from 2 to 5 devices and gained Multi-hop, and the old Pro plan became Pro Suite (10 devices instead of 7) at the same price. Many review sites still list the old plans, so check IVPN’s pricing page before you buy.

There are no introductory discounts, so the renewal price is the same as the first payment, and the 2- and 3-year plans are gone. VPN That points out that you can choose whether a subscription renews automatically. The weekly plan is handy for a short trip.

Refunds: a full refund within 30 days, once per account, never prorated. Cash and voucher payments can’t be refunded, and App Store purchases go through Apple.

Port forwarding is not available. IVPN removed it in June 2023, which matters if you torrent a lot.

Who Is IVPN For?

IVPN suits people who want strong privacy with no account details: no email, cash or Monero payments, open-source apps, a firewall that can block traffic from boot, quantum-resistant WireGuard and daily key rotation. Flat pricing with no renewal jump and a weekly plan are uncommon. VPN That notes that Enhanced App Authentication isn’t normally seen elsewhere, and I find the Wi-Fi rules useful too.

It is not my pick for streaming: results vary between reviewers, and IVPN makes no promises about Netflix or BBC iPlayer. The network is small, about 41 countries, and there is no port forwarding. Top10VPN notes that the no-logs claim has never been tested by a court case or server seizure, and that the servers are not yet diskless (RAM-only). As of October 2026 I could not find the results of the July 2026 audit.

For the closest alternative with DAITA and a fixed price, see my Mullvad settings guide. For Secure Core and a free plan, see my Proton VPN settings guide. For streaming and extra security tools, see my NordVPN settings guide. For the full comparison, see my VPN comparison guide.

Did I Miss Anything?

I am always looking to improve my tutorials and will listen to any suggestions you have in the comments.

Cheers,
Mefat

Comments 0

No comments yet. Questions, corrections and your own experience are all welcome.

By using this site, you agree to the Privacy Policy.